PhobGCC Version 2.0.5 Elecrow Ordering Guide

This is an illustrated guide to ordering PhobGCC PCBs via the Elecrow Board House. Elecrow’s boards are significantly higher quality, have less manufacturing issues, and are tested before arrival, so you won’t receive non-functional boards. As such, they are the recommended option when it comes to ordering PhobGCC boards.

Elecrow Ordering Process Overview

1. Download the files
2. Fill out all information on the PCB assembly ordering page
3. Wait for an email to say the quote is ready
4. Go to your service orders page
5. Checkout

Purchasing the PhobGCC v2.0.5 board from Elecrow

Download the files available in the PhobGCCv2-HW Github in the releases section as shown below:

Once you’ve extracted the files from the .zip, you should have three files. The Phob2 gerbers, the Elecrow BOM, and the Elecrow INFO zip.

Head over to the PCB assembly ordering page and fill it out as follows:

NOTE: Set your PCBA quantity, country, and preferred shipping option

Once your settings match the image above, you then upload the BOM spreadsheet where it asks, followed by uploading the INFO zip where it asks you to “Upload Other Files”. Scrolling further down you upload the gerbers.

Once that’s set, you configure the PCB settings as follows:

NOTE: Your PCB quantity must match your PCBA quantity, otherwise you may end up with blank boards. You must also select immersion gold coating (ENIG)

Once its all filled out, double check your settings are set properly and then click “Get a quotation”

When the quote is ready, you’ll receive an email. Head over to your service orders page and click on checkout:

And the boards will arrive in 3-4 weeks.